Resources

How to Grout Tile Like a Pro

Grouting tile is a key step in tile installation, whether you're working on walls or floors. In this article we will go over the step-by-step process for how to apply grout to tile.

Tools You'll Need

To properly grout tile, you will need the appropriate tools. Gather the following before you begin:

Grout
Trowel
Grout float
Grout shaper
Sponge
Grout sealer
Three buckets
Clean water
Rubber gloves
Clean cloth
Safety glasses
Knee pads (for floor tiling)

of 7

Choose the Right Grout

Sanded grout is typically used for larger joints, generally wider than 1/8 inch. The sand in the grout keeps it sturdy and prevents cracking when spread into wider joints.

Unsanded grout has a smoother texture that's easy to work into narrower joints of less than 1/8 inch. This consistency also makes it easier to apply and wipe off tiles, which is particularly useful for vertical surfaces like tiled walls where the grout needs to stay in place without sagging.

It is also important to choose a grout color that gives the visual impact you want. There are many factors for how to decide on grout color, including coordinating with the tile color for an understated, seamless look or contrasting with the tile color to make the grout's bold lines their own design element.

Loading component...

of 7

Clean the Tile Joints

Before you begin mixing the grout, make sure the surface is completely dry and free of dust, debris. If you are re-grouting, fully remove the old grout. You can vacuum the area and wipe down the tiles with a damp cloth.

of 7

Mix the Grout

If you are grouting a large area, start by mixing only a small portion of grout. This will ensure your supply of grout stays moist and usable and does not dry out and become crumbly.

Pour a portion of grout powder into a clean, empty bucket then mix it with the right ratio of water according to the manufacturer's instructions. Mix it slowly by hand using a trowel until it has a smooth, peanut butter-like consistency with no dust or excess water left in the bucket.

Next, allow the grout to slake for the amount of time specified in the manufacturer's directions. When this slake time has passed, mix it again slightly to loosen the grout. Once you have loosened it, you should immediately start applying it to ensure the batch does not dry out.

Loading component...

of 7

Apply the Grout

Scoop a portion of grout onto a grout float. Position the grout float at a 45-degree angle and firmly drag the grout along the gaps between the tiles. Move in diagonal strokes to avoid pulling grout out of the joints. Work the grout firmly into the joints, pressing it in to ensure the joints are filled completely.

It's easier to keep the grout workable and achieve a clean finish if you work on one small, manageable area at a time

Loading component...

Methods for How to Grout a Tile Floor or Wall

For floors, begin at the corner farthest from the room's entrance, moving backward toward the entrance so that you are never standing or kneeling on the fresh grout.

For walls, start from the bottom and work your way up.

Loading component...

of 7

Remove Excess Grout

Let the grout set for 15 to 30 minutes and then begin gently wiping off the excess grout with a clean, damp sponge. Rinse the sponge frequently, using one bucket for getting the excess grout off the sponge and the other for re-dampening the sponge. Be sure to replace the water in both buckets frequently to keep it from getting too dirty. As you wipe, be careful not to remove grout from the joints.

After approximately 30 minutes, you can use a grout shaper to trim excess grout from the edges of the tiles. This will give the grout a crisp, professional look.

Loading component...

of 7

Curing

Let the grout dry for the time specified by the manufacturer. This will usually be 24 to 48 hours (1 to 2 days), but in some cases may be as long as 72 hours (3 days). For floor tile, do not move furniture back or even walk on the tile during this period. For countertops, do not replace appliances or furnishings during this period.

Loading component...

of 7

Polishing and Sealing

Once the grout has started to cure, you may notice a cloudy haze on the tiles. To remove this grout haze, gently polish the tile surfaces with a soft, dry cloth.

After the grout is cured according to manufacturer specifications, apply a grout sealer to protect it from stains and mold and mildew growth. This is especially important for floor tiles, which are subject to more wear and tear as well as bathroom floors, showers and kitchen backsplashes, which may be exposed to excessive moisture. Wait until the sealant has fully dried before exposing the surface to water.

How to Grout Tile Like a Pro

Tools You'll Need

Choose the Right Grout

Loading component...

Clean the Tile Joints

Mix the Grout

Loading component...

Apply the Grout

Loading component...

Methods for How to Grout a Tile Floor or Wall

Loading component...

Remove Excess Grout

Loading component...

Curing

Loading component...

Polishing and Sealing

Loading component...

Loading component...

Tile Grouting FAQs

How long do you leave grout before wiping it off?

What's the best way to keep things neat while grouting?

How do you fill in grout lines to make a smooth surface?

Loading component...

Choose the Right Grout

Mix the Grout

Apply the Grout

Methods for How to Grout a Tile Floor or Wall

Remove Excess Grout

Curing

Polishing and Sealing

Tile Grouting FAQs

How long do you leave grout before wiping it off?

What's the best way to keep things neat while grouting?

How do you fill in grout lines to make a smooth surface?

STAY Connected